Starter kits?





Results 1 to 9 of 9

Thread: Starter kits?

  1. #1
    Join Date
    Jun 2008
    Location
    Yorkshire Uk
    Posts
    1,511
    Post Thanks / Like

    Question Starter kits?

    Hi Guys, I've decided i want to give making my own jewellery a try, so can anyone suggest a good starter kit? I'll be starting from scratch so any help greatfully received. TYIA

  2. #2
    Beady Belle Guest

    Default

    Hi Tabs, can I suggest you go for some simple shaped beads to start with, it'll be easier for you to thread them in to your design. This is a nice one for an absolute beginner, and not too expensive either. There are also some tutorials on the website to get you started.

  3. <
  4. #3
    Join Date
    Jun 2008
    Location
    Yorkshire Uk
    Posts
    1,511
    Post Thanks / Like

    Default

    Thanks BeadyBelle, Can you tell me which of the tool kits is best, the small or the large? (silly question i know) Could you also tell me if the Smokey Rose kit would be suitable for beginners too?

    http://www.jewellerymaker.com/produc....aspx?c=MUGP43

    Many thanks again for your advice :)

    L x

  5. #4
    Beady Belle Guest

    Default

    If you think you're going to enjoy making and will carry on with it, I'd say go for the larger of the tool kits, as it also contains crimping pliers. When you're a bit more experienced, you'll want to use the crimping pliers and crimp covers as these give a more professional, finished look to a piece.

    One of the kits I had to demonstrate was the Smokey Rose, (the other was the Go Green which was 3 different strands of Unakite - but I think it must have sold out) and it was fairly simple, and I made 2 complete sets from it. I preferred not to mix the freeform nuggets with the rose quartz as they look beautiful on their own, and the round smokey quartz sit better with the overlapping rose quartz IMVHO.

    This is what I made with the kit, but it was purely to demonstrate what could be made, and of course, you'll want to do your own thing. There was one pair of shepherds hooks in the kit, but enough headpins for you to make another pair quite easily. The freeform nuggets don't have to be threaded in any order, once threaded, they will fall in to their own 'pattern' If you need any help, just ask Tabs.




  6. #5
    Join Date
    Jun 2008
    Location
    Yorkshire Uk
    Posts
    1,511
    Post Thanks / Like

    Default

    Both sets are gorgeous, obviously i'm a mere amateur so not sure i could produce something like that easily lol. I thought perhaps the bigger tool kit to start and liked the colours in the smokey rose set. Thinking cap needed i think. If i think of anything else i'll be sure to ask....ty for the offer :))

  7. #6
    Join Date
    Jun 2009
    Posts
    197
    Post Thanks / Like

    Default

    Hi Tabs,

    I started as a cpmplete beginner a few weeks ago and am now hooked! My only regret is that I bought the small tool kit - I definately agree that you should go for the bigger one.

  8. Flower
  9. #7
    Beady Belle Guest

    Default

    The other thing I'd recommend you get Tabs is the bead board, I think it's only 1.95 and well worth it. You'll be able to lay out your design on it, and then be able to see what the finished article would look like, and if you don't like it, just move the beads around. It saves lots of time using the board instead of threading and then having to undo it if you don't like it, or wish to try something different. It also has markings around it so you know what the finished length will be.

  10. #8
    Join Date
    Jun 2008
    Location
    Yorkshire Uk
    Posts
    1,511
    Post Thanks / Like

    Default

    Ok, just phoned JM to place an order and the large tool kit is out of stock for upto 14 days. Guess my new hobby will have to wait a while.

  11. #9
    Join Date
    Jun 2008
    Posts
    1,861
    Post Thanks / Like

    Default

    Quote Originally Posted by Tabs View Post
    Ok, just phoned JM to place an order and the large tool kit is out of stock for upto 14 days. Guess my new hobby will have to wait a while.

    What a shame Tabs!! If you want to get started you can always buy the smaller tool kit and add the crimping tool later.

    Have a look here

    http://cgi.ebay.co.uk/JEWELLERY-MAKI...ht_2831wt_1700



    http://cgi.ebay.co.uk/CRIMPING-PLIER...ht_2713wt_1700

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •